T8 Portable Gold Trommel Wash Plant

Up to 300 tons per hour, portable, quick to setup, and high recovery rates.

Our portable T8 gold trommel wash plant is designed specifically for gold recovery operations. We rate the T8 at up to 300 tons per hour, or 200 cubic yards. Results will vary depending on material conditions. Its design allows for portability and fast setup, with a 310 horse power hydraulic drive system. The plant includes a feed conveyor and a 10 foot long nugget trap. The plant is designed to accommodate a wide variety of sluice boxes or jigs. All wear areas have replaceable bolt-in wear plates, oversized shafts, oversized bearings, and high tensile frame.


Features include:

  • Pre-trommel nugget trap
  • Radio controlled grizzly dump
  • Hydraulic leveling
  • Hydraulic feeder positioning
  • Hydraulic raising feed conveyors
  • Variable speed control on trommel, feeder, and conveyors
  • Electrical starters
  • Urethane screens
  • Extremely high horse power ratio
  • Bolt in Hardened wear plates with hardened counter sunk bolts
  • Centralized lubrication points
  • Oversized bearings and shafts
  • Four point variable speed trommel drive
  • High tech recovery features
  • High tensile frames
  • Time saving, easy, and fast setup and assembly
  • Designed to accommodate a wide variety of sluice boxes or jigs
  • Water manifold with adjustable brass spray nozzles

Average typical sluice setup recommended is four 36-inch wide by 30 foot long setup. MSI will calculate this for you to best fit your mine site.


Power requirement is 240 kilowatts. Water requirement is 1,100 to 2,900 gallons per minute.


Water pumps, generators, jigs, and sluice boxes available upon request at an additional cost.

A video demonstration of a MSI trommel in action:

A video demonstration of a MSI trommel feeder in action:

A video demonstration of a MSI trommel spray bars in action:

Quick Contact: