TV5 Portable Vibratory Gold Wash Plant

Up to 115 tons per hour, ultra-portable, quick to setup, and high recovery rates.

An ideal machine where your raw materials are more of a sandy and gravely type material and not sticky or clay bound. This design allows for nugget and fine gold recovery. The TV5's horizontal design allows for much lower feed height and improved cleaning action of materials. It accepts up to 8-inch material and incorporates three decks for thinning and separation. It has independent spray bars with heavy duty, changeable, brass spray nozzles. All wear areas have replaceable bolt-in wear plates, oversized diameter shafts, oversized bearings, and a high tensile frame.

Testing in clean river bottom material, the wash plant was able to achieve 109 tons per hour with 1,260 gallons per minute of water usage. Under correct conditions, we rate this machine between 50 to 115 tons per hour.


Features include:

  • Pre-wetting feed hopper
  • Pre-screen distribution area
  • Under screen material splitters
  • Sluice splitters
  • Electrical starters
  • Screens
  • Extremely high horse power ratio
  • Bolt-in hardened wear plates with hardened counter sunk bolts
  • Centralized lubrication points
  • Oversized bearings and shafts
  • Water manifold and spray bars with independent valves
  • Brass spray nozzles
  • High tech recovery features
  • High tensile structure and frames
  • Designed to accommodate a wide variety of sluice boxes or jigs
  • Designed for nugget trap
  • Time saving, easy, and fast setup and assembly

Average typical sluice setup recommended is two 30-inch wide by 30 foot long setup. MSI will calculate this for you to best fit your mine site.


Power requirement is 30 kilowatts. Water requirement is 800 to 1,100 gallons per minute.


Water pumps, generators, jigs, nugget trap, and sluice boxes available upon request at an additional cost.

Quick Contact: