MSI Gold Mining Equipment

Madden Steel Inc.

Power requirement is 60 kilowatts. Water requirement is 3,000 to 3,500 gallons per minute.

Back to Home Page

Features include:

  • Pre-wetting feed hopper
  • Pre-screen distribution area
  • MSI's material splitters
  • Electrical starters
  • Screens
  • Extremely high g-force
  • Bolt-in hardened wear plates with hardened counter sunk bolts
  • Centralized lubrication points
  • Oversized bearings and shafts
  • Water manifold and spray bars with independent valves
  • Spray nozzles
  • High tech recovery features
  • High tensile structure and frames
  • Designed to accommodate a wide variety of sluice boxes or jigs
  • Designed for nugget trap
  • Time saving, easy, and fast setup and assembly

SV9 Gold Wash Plant

An ideal gold wash plant where your raw materials are more of a sandy and gravely type material and not sticky or clay bound. This design allows for nugget and fine gold recovery. Up to 450 tons per hour and high gold recovery rates. The SV9's also known as Monster Red has a horizontal design allows for much lower feed height and improved cleaning action of materials. It accepts up to 8-inch material and incorporates two or three decks for thinning and separation. It has independent spray bars with heavy duty, changeable,  spray nozzles. All wear areas have replaceable bolt-in wear plates, oversized shafts, oversized bearings, and a high tensile frame.

Water pumps, generators, jigs, and sluice boxes available upon request at an additional cost.

Average typical sluice setup recommended is four 40-inch wide by 30 foot long setup. MSI will calculate this for you to best fit your mine site.

SV9 Vibratory Gold Wash Plant

Also known as Monster Red. Up to 450 tons per hour and high recovery rates.